Application Instructions
How To Apply A Small Transfer Sticker
![Step 1 - Clean](jpg/step-1-clean-surface.42b27f6bb78a.jpg)
Step 1
Clean the area thoroughly with rubbing alcohol or soap and water. Do not use a glass cleaner because it will leave a residue behind that will prevent the sticker from adhering well.
![Step 2 - Prepare the sticker](jpg/step-2-scrape.ca7a61da4ba8.jpg)
Step 2
Rub a squeegee or credit card firmly across the sticker through the clear transfer tape to prepare it for application. This ensures the sticker will cling to the transfer tape and removes any air bubbles that may have formed.
![Step 3 - Peel the sticker backing](jpg/step-3-peel-backing.4171f0cc6d4f.jpg)
Step 3
Peel the white paper backing off the sticker. If the sticker clings to the backing, slowly replace the paper backing and repeat Step 2.
![Step 4 - Apply the sticker](jpg/step-4-place.15756b1449c2.jpg)
Step 4
Slowly lower the sticker onto the surface and rub it in place firmly with a squeegee or credit card. For best results, wait 24 hours before moving to the next step.
![Step 5 - Peel the transfer tape](jpg/step-5-peel.7c389a6fa334.jpg)
Step 5
Slowly peel the clear transfer tape off at an angle. Be careful not to pull the sticker off the surface. If sticker pulls away from the surface repeat Step 4.